Compare two microphones by numbers, not impressions: mic-compare

Record the same phrase on two mics at matched gain and let the agent report response, noise floor, per-band SNR, plosives and sensitivity, and what EQ can still fix.

Claude Codebeginner30 minunverified
Use the mic-compare skill on these two takes: {mic_a.wav} and {mic_b.wav}. First check the recording is valid: matched preamp gain, peaks between -12 and -6 dBFS, no clipped samples. Then report LUFS, SNR, spectrum shape normalised to 300-3000 Hz, voice minus noise per band, hum, and plosives per minute. End with a verdict: what EQ can fix, what is baked into the mic.

In Claude Code, paste the prompt as a message.

Install

npx skills add fortunto2/superduper-dsp --skill mic-compare
# or the whole set as a Claude Code plugin (commands then look like /superduper-dsp:mic-compare):
claude plugin marketplace add https://github.com/fortunto2/superduper-dsp
claude plugin install superduper-dsp@superduper-dsp --scope user

Steps

  1. Record both mics saying the same 30-plus second phrase at the same distance and the same preamp gain, with real pauses (the pauses measure the noise floor).
  2. Install the skill. The measuring code runs with uv: numpy, scipy, soundfile and pyloudnorm.
  3. Paste the prompt. Read the validity check before the verdict.

Tips

  • Matched gain decides everything. In the author's test a mic looked 5.7 dB cleaner with free-run gain and 2.8 dB noisier once gain was matched.
  • A boost raises signal and noise equally: an EQ shelf cannot fix a worse per-band SNR.
  • Room pickup at 300 to 2000 Hz cannot be EQed out; it sits under the voice.
works withClaude Code: Runs as a skill or a prompt in the terminal; can read your files and write the result.
costFree. No API, no key.
statusUnverified: written from the technique, not yet run end to end by us.
sourcemic-compare skill in superduper-dsp (MIT)
licenseCC BY 4.0 for the text here; skills are MIT.
updated2026-11-10
for agentsmic-compare-two-microphones-by-numbers.md
#microphone#audio#snr#plosives#eq#measurement

Related

Music & sound intermediate

Voice cleanup checklist: room tone, de-ess, noise gate, in that order

Six passes that turn a phone or lav recording into a usable voice track, each with the ffmpeg filter and a starting parameter to adjust by ear, in the order that keeps the gate off word endings.

ffmpegCapCut / any editorBy hand
Music & sound intermediate

Mix and master by measurement: sdsp-mix

An agent mixes the way an engineer would: render, measure against a commercial reference, change one thing. Mix map of who masks whom, kick and bass ducking, mastering to a loudness target.

Claude Code
Music & sound intermediate

Nine agent skills for mixing, mastering and making music (superduper-dsp)

A Claude Code plugin that teaches an agent to mix by measurement, build songs in REAPER, render plugin chains headless, turn audio into MIDI and tear down a reference track.

Claude Code
Music & sound intermediate

Recording to MIDI: pick the model by material, then check it

Three local transcription models fail in different directions. The skill picks one by what the material is, runs it, and checks the result before you trust it.

Claude Code
Music & sound advanced

Render plugin chains from a text file, no DAW: sdsp-chain

One TOML file describes tracks, effects, sidechains, automation and playable instruments; a Rust command renders it to WAV and prints LUFS and true peak per stage.

Claude Code
Music & sound advanced

Mashups and ciphers with a beat grid: sdsp-mash

Pick pairs by BPM and key, split stems, stretch only the beat, and render one beat with verses from other songs, or a beat switch per verse, from a TOML file.

Claude Code