---
url: https://superduperai.co/library/mic-compare-two-microphones-by-numbers/
title: Compare two microphones by numbers, not impressions: mic-compare
description: Record the same phrase on two mics at matched gain and let the agent report response, noise floor, per-band SNR, plosives and sensitivity, and what EQ can still fix.
category: music
platforms: [any]
works_with: [claude-code]
tags: [microphone, audio, snr, plosives, eq, measurement]
difficulty: beginner
verified: false
created: 2026-11-10
updated: 2026-11-10
source: https://github.com/fortunto2/superduper-dsp/tree/main/skills/mic-compare
---

# Compare two microphones by numbers, not impressions: mic-compare

Record the same phrase on two mics at matched gain and let the agent report response, noise floor, per-band SNR, plosives and sensitivity, and what EQ can still fix.

## Prompt

```text
Use the mic-compare skill on these two takes: {mic_a.wav} and {mic_b.wav}. First check the recording is valid: matched preamp gain, peaks between -12 and -6 dBFS, no clipped samples. Then report LUFS, SNR, spectrum shape normalised to 300-3000 Hz, voice minus noise per band, hum, and plosives per minute. End with a verdict: what EQ can fix, what is baked into the mic.
```

## Install

```sh
npx skills add fortunto2/superduper-dsp --skill mic-compare
# or the whole set as a Claude Code plugin (commands then look like /superduper-dsp:mic-compare):
claude plugin marketplace add https://github.com/fortunto2/superduper-dsp
claude plugin install superduper-dsp@superduper-dsp --scope user
```

## Steps

1. Record both mics saying the same 30-plus second phrase at the same distance and the same preamp gain, with real pauses (the pauses measure the noise floor).
2. Install the skill. The measuring code runs with uv: numpy, scipy, soundfile and pyloudnorm.
3. Paste the prompt. Read the validity check before the verdict.

## Tips

- Matched gain decides everything. In the author's test a mic looked 5.7 dB cleaner with free-run gain and 2.8 dB noisier once gain was matched.
- A boost raises signal and noise equally: an EQ shelf cannot fix a worse per-band SNR.
- Room pickup at 300 to 2000 Hz cannot be EQed out; it sits under the voice.

## Works with

- Claude Code: Runs as a skill or a prompt in the terminal; can read your files and write the result.
